Product ID:GOLDEN LAN CONDITIONER 11X1122A
MSDS Date:08/07/1989
FSC:6850
NIIN:00F009002
MSDS Number: BGZDJ

DEXTER COATINGS

ONE EAST WATER STREET
WAUKEGAN, IL 60085

Emergency Phone: (312) 831-3961

Info Phone: (312) 831-3961

Preparer: L R CRUZ

Cage: 0HKK2

DEXTER SPECIALTY COATINGS

HAYWARD, CA 94544 US

Telephone: 415-791-1961

Cage: 0HKK2

MINERAL OIL

CAS: 8042-47-5

RTECS: PY8047000

Fraction By Weight: 70-80%

XYLENES (O-,M-,P- ISOMERS) (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 10-20%

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

BENZENE (SARA III)

CAS: 71-43-2

RTECS: CY1400000

Fraction By Weight: .00008%

OSHA PEL 1PPM/5STEL;1910.1028

ACGIH TLV: 10 PPM; A2; 9192

EPA Report Quantity: 10 LBS

DOT Report Quantity: 10 LBS

1.213 LBS/GAL.

RTECS: 9999999VO

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: MAY CAUSE IRRITATION OF
THE RESPIRATORY TRACT, HEADACHE, OR DIZZINESS. SKIN/EYE: IRRITANT.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: MAY CAUSE IRRITATION OF THE
RESPIRATORY TRACT, HEADACHE, DIZZINESS, OR DROWSINESS. SKIN/EYE:
IRRITANT. THE HAZARDOUS MATERIALS LISTED MAY AFFECT THE LIVER.

First Aid:INHALATION: REMOVE FROM EXPOSURE. EYE: FLUSH IMMEDIATELY
W/LARGE AMOUNTS OF RUNNING WATER FOR AT LEAST 15 MINUTES. SKIN:
REMOVE CONTAMINATED CLOTHING & WASH W/SOAP & WATER. INGESTION:
DRINK WATER. IF NECESSARY, CONSULT A PHYSICIAN FOR ANY OF THESE
CONDITIONS.

Flash Point Method:SCC
Flash Point:103F
Lower Limits:1.00%
Extinguishing Media:WATER FOG, FOAM, DRY CHEMICAL, CO2
Unusual Fire/Explosion Hazard:MAY PRODUCE HAZARDOUS FUMES WHEN HEATED
TO DECOMPOSITION AS IN WELDING.

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION, AVOID
BREATHING VAPORS, VENTILATE AREA & REMOVE W/INERT ABSORBENT &
NON-SPARKING TOOLS.

Handling and Storage Precautions:DON'T TAKE INTERNALLY. CONTAINERS
SHOULD BE GROUNDED WHEN POURING. AVOID FREE FALL OF LIQUID IN
EXCESS OF A FEW INCHES.
Other Precautions:MAKE SURE DRUM IS COMPLETELY EMPTY BEFORE ATTEMPTING
TO WELD/BRAZE. DRUM SHOULD BE INDUSTRIALLY CLEANED PRIOR TO REUSE.
DON'T FLAME CUT/BRAZE/WELD W/O NIOSH APPROVED
RESPIRATOR/APPROPRIATE VENTILATION . KEEP CONTAINER CLOSED WHEN NOT
IN USE.

Respiratory Protection:USE NIOSH/MSHA APPROVED AIR LINE TYPE
RESPIRATORS OR HOODS FOR ENCLOSED & CONFINED AREAS. AIR PURIFYING
RESPIRATORS MAY BE USED FOR OTHER AREAS.
Ventilation:PROVIDE MECHANICAL/LOCAL EXHAUST VENTILATION TO KEEP
Protective Gloves:RESISTANT
Eye Protection:SAFETY EYEWEAR
Supplemental Safety and Health

Boiling Pt:B.P. Text:281-620F
Vapor Density:>AIR
Appearance and Odor:LIQUID

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:CO, OXIDES OF NITROGEN.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE, AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.